WELL KEPT Safety Razor Kit ~ Dusty Rose

$132


well kept’s safety razor kit comes in a beautiful wooden box and includes:

  • brass safety razor (black)
  • 4 oz shave oil
  • agave exfoliating cloth
  • pack of 5 blades

 

Safety razors are gentler on your skin, dramatically decreasing irritation due to their single blade. These razors can be used with a shave oil – allowing you to shave and moisturize simultaneously.

 

HOW TO PUT TOGETHER & CHANGE THE BLADE OF YOUR SAFETY RAZOR


This is so simple, yet for those who’ve never done it, not immediately obvious. Your solid brass razor is comprised of three pieces to which you’ll add a fourth (the blade). I like to set up/change the blade of my razor before I hop into the shower or bath, dry hands make the whole process easier.

how to change the blade on your safety razor

Take hold of your razor in one hand, then grip the head of the razor in the other. Be sure to pinch from the top and bottom in order to avoid the blade which protrudes from the sides. Unscrew the handle and gently lay the pieces on whichever surface you’re working on. I tend to lay out a small towel so that the handle doesn’t roll away (painfully obvious I know, but I honestly had it roll off the counter twice before I thought of it).

If you’re changing out the blade this is a great time to give all three pieces a good rinse. If you’ve been using the shave oil, a quick bath in soapy water works really well (I usually use a bit of dish soap which cuts the oil no problem).

how to assemble your safety razor

Putting it back together is simple. Just position the blade onto the top cover (piece 1). Position the next on top of the blade ensuring the spacer (the elevated square visible on piece 3) touches the blade. If you place this piece backwards (see below) you’ll find it impossible to shave as the blade will be flush and won’t ever touch your skin. Finally, screw the handle back into place. Remember to hold the head steady from the top and bottom rather then sides in order to avoid pinching the blade (which will be brand new and sharp!). Screw the handle on firmly, you’ll notice the blade will flex a little, that’s totally normal :)

Watch the how to video here.

 

Make sure piece 3 has the round edge facing up and against the blade:safety razor trouble shooting 

 

 

Voila! Your razor is ready for action!

 

My insanely talented friend Sarah Campbell did up these illustrations and my insanely talented husband shot a quick video.

A familiar question that well kept Founders Natalie and Emilie get asked often is: how to shave with a safety razor, quickly followed with comments such as, “I’m scared!” or “I’m nervous!” They get it, they were too! But, according to the BFF's here’s the secret… there is no secret. It’s easy! You literally shave the exact same way! 

That being said, below they share a few of their tips and tricks that will help you get the best shave possible:

1 – take your time

This holds true whether you’re using a safety razor or your old multi-blade cartridge razor. You’re most likely to nick yourself if you’re in a rush. Instead of trying to shave as quickly as possible ten minutes before you head out the door, consider shaving as a mini self care ritual. I like to have a long steamy shower, exfoliate thoroughly, massage shave oil into my skin, then methodically shave being sure not to miss anything (there’s nothing worse then crawling into bed and realizing you missed a one inch strip on the back of your calf!).

2 – steam & exfoliate

I’ve already mentioned it, but here it is again: for your best shave, make sure your skin is warm and exfoliated. I like to shave at the end of my shower after thoroughly exfoliating. Think of exfoliating as a mini massage and don’t skimp on it. Not only does it unclog pores and soften hair, it also feels amazing!

3 – apply shave oil or soap

I personally prefer to use shave oil as it moisturizes simultaneously, but everyone’s different! I know lots of people who prefer soap, figure out what works best for you. Either way, this is the time to apply it. I usually focus on one area at a time rather then trying lather up all areas I plan to shave at once. I rub my shave oil in, then quickly rinse my hands with soap to make sure I can get a good grip on my razor handle.

4 – don’t apply any pressure

well kept safety razors are made of solid brass and have a beautiful weight to them. This means that all you have to do is gently glide the razor over your skin and let its weight apply the pressure for you. You’ll find out what works best for you in terms of how you hold the razor, but a good rule of thumb is to position the razor at a 30 degree angle.

5 – go with the grain

At least to start! Shaving against the grain is much harsher and can cause serious irritation and razor burn particularly where skin is thin and sensitive (bikini line, I’m looking at you!). Depending on how close you get with your first pass, you can do a second with the grain, across the grain or against the grain. It all depends on the area you’re shaving and your particular skin and hair.

What works for me:

  • legs – I go against the grain right off the bat. The skin on my legs isn’t particularly sensitive and I find I can get a really close shave with just one pass.
  • armpits – I go with the grain on my first pass, then pull skin taught and do a second pass against the grain applying ZERO pressure.
  • bikini area – First pass with the grain and a second pass going across the grain rather then against it.
6 – keep razor clean

Every few passes I like to rinse out my razor head. I like to grasp the razor head from the top and bottom and loosen it a half turn. I then either run it under the shower or swish it through a small bowl of water to make sure I remove all the buildup (hair, skin, oil, gunk, etc). Keeping your blade clean and sharp is key in avoiding irritation.

7 – keep blade sharp

When I ask people how often they change their razor blade they usually answer avoiding eye contact at all costs. This is for one of two reasons, either they’re lying, or they know the timeframe they’re giving me is totally outrageous. Don’t worry, you’re not alone! Almost everyone I’ve ever spoken to doesn’t change their razor blade often enough, but as of know I want you to change that. Keeping your razor blade sharp is INTEGRAL to avoiding razor burn and in grown hairs. One of the best parts of using a safety razor is that the cost of blades is so negligible you really have no excuse! When purchased in bulk, the blades can cost as little as $0.10! Bonus, you can collect the blades in a small tin and recycle them. 

well kept about us
We’ve been friends for ages, and a few years ago were both adjusting the products we use and consume trying to align them with our values. We were looking for simple products, with natural ingredients and appealing aesthetics and got stuck on not being able to find an alternative for plastic, baby blue razors. After a lot of research and product testing, we decided to create well kept to provide a superior, more sustainable alternative for women’s shaving.

We want to create a space where women can not only give themselves the time to enjoy shaving with natural, sustainable, quality products, but also to speak openly about – leg hair, armpit hair, ‘self-care’ myths, plastic waste, cosmetic industry ingredients – things that don’t always meet the norms of the beauty industry.

Creating a community has been one of the most rewarding parts of this process – welcome to our community!

Emilie & Natalie

Vancouver, Canada

You may also like

Recently viewed